Manually reboot the unit by disconnecting and reconnecting the power. STEP 7: After the firmware upgrade is done, the buzzer will give two short beeps this will marked the end of the upgrade process. . The DNR will begin running thought it''s start up sequence, you will hear a long beep follow by a short one (continue holding the SCAN button) until the DNR-202L LED ring light will show a flashing red light, release the "Scan" button. STEP 6: Press and hold “Scan” button and connect the power back to the DNR-202L. Insert the USB flash drive into USB port marked "HD1" of the DNR-202L (next to the Ethernet port marked #3 in the image below ). STEP 5: Power off the DNR-202L by unplugging the power source. STEP 4: Copy the "update.bin" to your freshly formatted flash drive and disconnect the flash drive from your computer when this process is done: (Warning: backup any files on your flash drive before starting this process, you will loose all files previously saved in it when performing a format). Quick Format the USB stick to FAT32 file system to be use on the next step. Insert a Flash Drive, memory USB stick/USB stick to one of your computer USB ports. Unpack the downloaded ZIP file and rename the extracted firmware file (with file extension ".bin") to " update.bin". Download the latest version of the firmware by visiting D-Link legacy site Reconfiguration of your DNR-202L will be needed at the end of this process. WARNING: This Manual firmware upgrade/rescue process will reset the unit back to factory setting. An error message regarding it''s certificate shows up when trying to access the configuration pages and the device appears frozen. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |